Mask Bacterial Filtration Efficiency (BFE) Detector ASTMF2299/ASTMF2299 03(2017), EN14683-2019,ASTMF2101-19
Product overview:
This PFE testing machine is used to measure the bacterial filtration efficiency (BFE) of medical face mask materials, employing a ratio of the upstream bacterial challenge to downstream residual concentration to determine filtration efficiency of medical face.
Standards:
ASTMF2299/ASTMF2299 03(2017), EN14683-2019,ASTMF2101-19.
Technical Parameters:
Technical characteristics of mask bacterial filtration efficiency (BFE) detector
2.1 Negative pressure experiment system to ensure the safety of operators;
2.2 Built-in peristaltic pump in negative pressure cabinet, A and B two-stage six-stage Andersen;
2.3 Flow rate of peristaltic pump can be set;
2.4 Dedicated microbial aerosol generator can be set at night.
2.5 atomization effect is good;
2.6 Embedded high-speed industrial microcomputer control;
2.7 10.4-inch industrial-grade high-brightness color touch display;
2.8 USB interface, support U disk data transfer;
2.9 Cabinet with built-in high-brightness lighting;
2.10 Built-in leakage protection switch to protect operator safety;
2.11 The inner layer of the stainless steel is integrally processed and formed, and the outer layer is spray-coated cold-rolled sheet
2.12 Insulation and flame retardant between inner and outer layers;
2.13 front switch glass door, convenient for experimenters to observe and operate;
2.14 detachable bracket, height of bracket can be adjusted;
2.15 Support and move dual-purpose casters.
Technical index:
Main parameters | Parameter range | Resolution | Maximum allowable error |
A channel sampling flow rate | 28.3L/min | 0.1L/min | better than ±2.5% |
B channel sampling flow rate | 28.3L/min | 0.1L/min | better than ±2.5% |
Spray flow | (8~10)L/min | 0.1L/min | better than ±5.0% |
Peristaltic pump flow | (0.006~3.0)mL/min | 0.001ml/min | better than ±2.5% |
Front pressure of channel A | (-20~0)kPa | 0.01kPa | better than ±2.5% |
Front pressure of channel B | (-20~0)kPa | 0.01kPa | better than ±2.5% |
Pressure before spray flowmeter | (0~300)kPa | 0.1kPa | better than ±2.5% |
Aerosol chamber negative pressure | (-90~-120)Pa | 0.1Pa | better than ±2.0% |
Operating temperature | (0~50)℃ |
Cabinet negative pressure | (-50~-200)Pa |
Data storage capacity | >100000 groups |
HEPA filter characteristics | Filtration efficiency for particles above 0.3um ≥99.99% |
Aerosol generator mass median diameter | Average particle diameter (3.0 ± 0.3) μm, geometric standard deviation ≤1.5 |
Dual 6-stage Anderson sampler captures particle size | Ⅰ>7μm,Ⅱ(4.7~7)μm,Ⅲ(3.3~4.7)μm,Ⅳ(2.1~3.3)μm,Ⅴ(1.1~2.1)μm,Ⅵ(0.6~1.1)μm |
Aerosol chamber specifications | (Length 600 x diameter 85 x thickness 3) mm |
Total number of positive QC sampler particles | (2200±500)cfu |
Negative pressure cabinet ventilation flow | ≥5m3/min |

